Changes to Step #22

Edit by Adam Dumas —

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Tighten gland nut to side of bleed down valve body with using 3/4" and 5/8" wrench
-[* black] Thread adapter fitting into actuator housing
-[* black] Tighten adapter fitting into actuator housing using 1-1/4" and 1-1/16" wrench
+[* black] Tighten the gland nut to the side of the bleed down valve body using 3/4" and 5/8" wrench
+[* black] Thread the adapter fitting into the actuator housing.
+[* black] Tighten the adapter fitting into the actuator housing using 1-1/4" and 1-1/16" wrench.