Changes to Step #20

Edit by Adam Dumas —

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Tighten using a 1-1/16" wrench on actuator housing and a 7/8" wrench on valve body
-[* black] Apply blue goop to 3/8" gland nut threads
-[* black] Thread 3/8" gland nut with HP tubing into bleed down valve adapter
+[* black] Tighten the actuator housing to the valve body using a 1-1/16" and 7/8" wrench.
+[* black] Apply Blue Goop to the 3/8" gland nut threads.
+[* black] Thread the 3/8" gland nut with the high-pressure tubing into the bleed down valve adapter.