Changes to Step #20
Edit by Arion Vandergon —
Edit approved by Arion Vandergon
- Before
- After
- Unchanged
Step Lines
| [* black] Tighten using a 1-1/16" wrench on actuator housing and a 7/8" wrench on valve body | |
| - | [* black] Apply blue goop to gland nut threads |
| - | [* black] Thread gland nut with HP tubing into bleed down valve adapter |
| + | [* black] Apply blue goop to 3/8" gland nut threads |
| + | [* black] Thread 3/8" gland nut with HP tubing into bleed down valve adapter |
