Changes to Step #20
Edit by Adam Dumas —
Edit approved by Adam Dumas
- Before
- After
- Unchanged
Step Lines
| [* black] Tighten using a 1-1/16" wrench on actuator housing and a 7/8" wrench on valve body | |
| [* black] Thread in bleed down valve adapter to bleed down valve outlet | |
| - | [* black] Tighten bleed down valve adapter to bleed down valve outlet |
| + | [* black] Tighten bleed down valve adapter to bleed down valve outlet using 1" and 7/8" wrench |
