Changes to Step #17

Edit by Adam Dumas —

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Tighten back-up screw to top of bleed down valve body using a 5/16" socket wrench
-[* black] Place flow reducer into hole beneath seat cavity in outlet adapter
-[* black] Apply a layer of blue goop to external threads and seat cavity of outlet adapter
+[* black] Tighten the back-up screw to the top of the bleed down valve body using a 5/16" socket wrench.
+[* black] Place the flow reducer into the hole beneath the seat cavity in the outlet adapter.
+[* black] Apply a layer of Blue Goop to the external threads and the seat cavity of the outlet adapter.