Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #14

Edit by Adam Dumas

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

[* black] Slide the bushing onto the point of the needle with the chamfered end towards the back-up screw.
-[* black] Place the hoop onto the high-pressure seal with the tapered end towards the high-pressure seal and opposite from the O-ring.
-[* black] Place the high-pressure seal assembly onto the point of the needle with the hoop, first.
+[* black] Put the hoop onto the high-pressure seal with the tapered end towards the high-pressure seal and opposite from the O-ring.
+[* black] Put the high-pressure seal assembly onto the point of the needle with the hoop, first.