Changes to Step #13
Edit by Adam Dumas —
Edit approved by Adam Dumas
- Before
- After
- Unchanged
Step Lines
- | [* black] Clean bleed down valve body with isopropyl alcohol or similar |
---|---|
- | [* black] Apply [http://www.accustream.com/all-products/11447.html| |
- | [* black] Slide back-up screw on to needle so flat end of needle is flush with non threaded part of back-up screw |
+ | [* black] Clean the bleed down valve body with isopropyl alcohol or a similar cleaning agent. |
+ | [* black] Apply a[http://www.accustream.com/all-products/11447.html|high vacuum grease] to the needle. |
+ | [* black] Slide the back-up screw on to the needle so the flat end of the needle is flush with the non threaded part of the back-up screw. |