Changes to Step #10

Edit by Adam Dumas —

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Loosen outlet fitting from bleed down valve body using 7/8" and 13/16" wrench
-[* black] Unthread outlet fitting from bleed down valve body
-[* black] Remove HP Seat from bleed down valve body and discard
+[* black] Loosen the outlet fitting from the bleed down valve body using 7/8" and 13/16" wrench.
+[* black] Unthread the outlet fitting from the bleed down valve body.
+[* black] Remove the high-pressure seat from the bleed down valve body and discard.