/

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Adam Dumas —

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Thread adapter fitting to actuator housing
-[* black] Tighten adapter fitting to actuator housing using 1-1/4" and 1-1/16" wrench
-[* black] Loosen 3/8" to 1/4" adapter from bleed down valve outlet adapter using 1" and 13/16" wrench
+[* black] Loosen 3/8" to 1/4" adapter from outlet fitting with 7/8" and 13/16" wrench
+[* black] Unthread 3/8" to 1/4" adapter from outlet fitting
+[* black] Loosen outlet fitting from bleed down valve body using 7/8" and 13/16" wrench