Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by Adam Dumas

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

[* black] Slide the new back-up ring (flat) into the groove of the piston.
[* icon_note] Make sure the concave side of the back-up ring is towards the O-ring.
[* black] Slide the new O-ring (rounded) into the groove of the piston.
-[* black] Insert the piston assembly into the actuator housing and push with the included dowel.
+[* black] Put the piston assembly into the actuator housing and push with the included dowel.