Changes to Step #9
Edit by Adam Dumas —
Edit approved by Adam Dumas
- Before
- After
- Unchanged
Step Lines
- | [* black] Slide new back-up ring (flat) into groove of piston. |
---|---|
- | [* icon_note] Make sure concave of back-up ring |
- | [* black] Slide new |
- | [* black] Insert piston assembly into actuator housing and push with included dowel |
+ | [* black] Slide the new back-up ring (flat) into the groove of the piston. |
+ | [* icon_note] Make sure the concave side of the back-up ring is towards the O-ring. |
+ | [* black] Slide the new O-ring (rounded) into the groove of the piston. |
+ | [* black] Insert the piston assembly into the actuator housing and push with the included dowel. |