Changes to Step #7

Edit by Adam Dumas

Edit approved by Adam Dumas


Step Lines

-[* black] Loosen actuator housing from Valve Body using 1-1/16" and 7/8" wrench
-[* black] Unthread actuator housing from valve body
-[* black] Push Piston out of actuator housing through oil port using included dowel
+[* black] Loosen the actuator housing from the valve body using 1-1/16" and 7/8" wrench.
+[* black] Unthread the actuator housing from the valve body.
+[* black] Push the piston out of the actuator housing through the oil port using the included dowel.