Skip to main content

Changes to Step #6

Edit by Adam Dumas

Edit approved by Adam Dumas


Step Lines

-[* black] Unthread gland nut with HP tubing from bleed down valve inlet
-[* black] Clean gland nut of all Blue Goop with isopropyl alcohol
-[* black] Loosen gland nut from outlet fitting using 13/16" and 5/8" wrench
+[* black] Unthread adapter fitting from actuator housing
+[* black] Apply o-ring lubricant to largest o-ring in kit
+[* black] Replace o-ring on adapter fitting with largest o-ring in kit