Changes to Step #5

Edit by Adam Dumas

Edit approved by Adam Dumas


Step Lines

-[* black] Apply o-ring lubricant to o-ring from kit for hydraulic fitting
-[* black] Replace o-ring on hydraulic fitting with o-ring in kit (smallest o-ring in kit)
-[* black] Loosen adapter fitting from Actuator Housing using 1-1/4" and 1-1/16" wrench
+[* black] Apply an O-ring lubricant to the O-ring from the kit for the hydraulic fitting.
+[* black] Replace the O-ring on the hydraulic fitting with the O-ring from the kit (smallest O-ring in kit).
+[* black] Loosen the adapter fitting from the actuator housing using 1-1/4" and 1-1/16" wrench.