Changes to Step #5

Edit by Adam Dumas

Edit approved by Adam Dumas


Step Lines

-[* black] Loosen actuator housing from Valve Body using 1-1/16" and 7/8" wrench
-[* black] Unthread actuator housing from valve body
-[* black] Loosen gland nut from Bleed Down Valve inlet using 5/8" and 3/4" wrench
+[* black] Apply o-ring lubricant to o-ring from kit for hydraulic fitting
+[* black] Replace o-ring around hydraulic fitting with o-ring in kit (smallest o-ring in kit)
+[* black] Loosen adapter fitting from Actuator Housing using 1-1/4" and 1-1/16" wrench