Changes to Step #4

Edit by Adam Dumas

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Unthread adapter fitting from actuator housing
-[* black] Apply o-ring lubricant to largest o-ring in kit
-[* black] Replace o-ring on adapter fitting with largest o-ring in kit
+[* black] Clean gland nut of all blue goop with isopropyl alcohol
+[* black] Loosen hydraulic fitting from adapter fitting using 1-1/4" and 7/8" wrench
+[* black] Unthread hydraulic fitting from adapter fitting