Changes to Step #3

Edit by Adam Dumas —

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Apply o-ring lubricant to o-ring from kit for hydraulic fitting (smallest o-ring in kit)
-[* black] Replace o-ring around hydraulic fitting with o-ring in kit
-[* black] Loosen adapter fitting from Actuator Housing using 1-1/4" and 1-1/16" wrench
+[* black] Clean gland nut of all blue goop with isopropyl alcohol
+[* black] loosen gland nut from outlet fitting (connected to valve body) using 13/16" and 5/8" wrench
+[* black] Unthread gland nut from outlet fitting (connected to valve body)