Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Adam Dumas

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

[* black] Apply water pressure to valve assembly to verify there are no leaks.
-[* black] With actuator turned ON, thread nozzle tube into bottom of valve body.
-[* black] Torque nozzle tube to valve using two wrenches (3/4" and 7/8").
+[* black] With actuator turned ON at controls
+[* black] Thread nozzle tube into bottom of valve body.