Changes to Step #10
Edit by Adam Dumas —
Edit approved by Adam Dumas
- Before
- After
- Unchanged
Step Lines
| + | [* black] Apply water pressure to valve assembly to verify there are no leaks. |
|---|---|
| + | [* black] With actuator turned ON, thread nozzle tube into bottom of valve body. |
| [* black] Torque nozzle tube to valve using two wrenches (3/4" and 7/8"). | |
| - | [* black] Turn air to actuator OFF to set poppet stem into seat. |
| - | [* black] Apply water pressure to valve assembly to verify there are no leaks. |
