Changes to Step #10
Edit by Adam Dumas —
Edit approved by Adam Dumas
- Before
- After
- Unchanged
Step Lines
| + | [* black] Torque nozzle tube to valve using two wrenches (3/4" and 7/8"). |
|---|---|
| [* black] Turn air to actuator OFF to set poppet stem into seat. | |
| [* black] Apply water pressure to valve assembly to verify there are no leaks. | |
| - | [* black] Quickly cycle valve on and off a few times to purge system of all contaminats before installing cutting head. |
