Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Adam Dumas

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Apply Blue Goop ([http://www.accustream.com/all-products/11111.html|11111]) to top of nozzle tube.
-[* black] Thread nozzle tube into bottom of valve body.
-[* black] Apply water pressure to valve assembly to verify there are no leaks.
+[* black] Thoroughly clean nozzle tube
+[* black] Apply Blue Goop ([http://www.accustream.com/all-products/11111.html|11111]) to top of nozzle tube
+[* black] With air to actuator ON

Image 1

Old Version

New Version

Image 3

No previous image

Added