Changes to Step #8
Edit by Adam Dumas —
Edit approved by Adam Dumas
- Before
- After
- Unchanged
Step Lines
- | [* black] Thread (hand tighten) actuator to top of valve body |
---|---|
- | [* black] Reconnect air line to top of actuator |
- | [* black] Turn air to actuator ON to relieve pressure from poppet stem |
+ | [* black] Thread (hand tighten) the actuator to the top of the valve body. |
+ | [* black] Reconnect the air line to the top of the actuator. |
+ | [* black] Turn the air to the actuator ON to relieve the pressure from the poppet stem. |