Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Adam Dumas

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Torque nozzle tube to valve using two wrenches (1" and 13/16").
-[* black] Turn air to actuator OFF to set poppet stem into seat.
-[* black] Apply water pressure to valve assembly to verify there are no leaks.
+[* black] Reconnect air line to top of actuator.
+[* black] Turn actuator air pressure ON to pull poppet stem up.
+[* black] Thoroughly clean nozzle tube.