Changes to Step #9
Edit by Adam Dumas —
Edit approved by Adam Dumas
- Before
- After
- Unchanged
Step Lines
| + | [* black] Insert O-ring ([http://www.accustream.com/all-products/11145.html|11145]) behind seat to hold in place. |
|---|---|
| [* black] Thread (hand tighten) actuator to top of valve body until it bottoms out. | |
| [* black] Reconnect air line to top of actuator and turn actuator air pressure ON to pull poppet stem up. | |
| - | [* black] Thoroughly clean nozzle tube. |
