Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Adam Dumas

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

+[* black] Insert seat at bottom of valve body.
[* black] Insert O-ring ([http://www.accustream.com/all-products/11145.html|11145]) behind seat to hold in place.
[* black] Thread (hand tighten) actuator to top of valve body until it bottoms out.
-[* black] Reconnect air line to top of actuator and turn actuator air pressure ON to pull poppet stem up.