Changes to Step #5
Edit by Adam Dumas —
Edit approved by Adam Dumas
- Before
- After
- Unchanged
Step Lines
| [* black] Insert poppet stem at top of Valve Body ([http://www.accustream.com/all-products/11144.html|11144]) and push with dowel rod until backup ring is flush with top of bore. | |
| [* black] Screw in On/Off Valve Screw([http://www.accustream.com/all-products/11218.html|11218]) into the valve body until it bottoms out. | |
| - | [* black] Use dowel rod at |
| + | [* black] Use dowel rod at bottom of valve body to push poppet stem's point flush with bottom of bore. |
