Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Arion Vandergon

Edit approved by Arion Vandergon

Before
After
Unchanged

Step Lines

-[* black] Insert back-up ring behind seal and push down until back-up ring is flush with top of the bore.
-[* black] Reinstall Valve screw (11218) into the valve body by turning screw until it bottoms out.
-[* black] Load Poppet stem into bottom of the valve body.
+[* black] Insert Backup Ring (11143) behind seal and push down until Backup Ring is flush with top of bore.
+[* black] Reinstall On/Off Valve Screw (11218) into valve body by turning screw until it bottoms out.
+[* black] Load Poppet Stem (11140) into bottom of valve body.