Changes to Step #4
Edit by Adam Dumas —
Edit approved by Adam Dumas
- Before
- After
- Unchanged
Step Lines
| [* black] Apply high pressure lubricant to OD of HP Valve Seal (11142). | |
| [* black] Use tweezers to install seal into valve body with o-ring side of seal down. | |
| [* black] Push seal into valve body using dowel. | |
| + | [* black] Slide HP Valve Seal (11142) with o-ring down on to the poppet stem. |
| + | [* black] Slide Backup Ring (11143) on to the poppet stem. |
