Changes to Step #11
Edit by Adam Dumas —
Edit approved by Adam Dumas
- Before
- After
- Unchanged
Step Lines
| - | [* black] Thread nozzle tube into bottom of valve body |
|---|---|
| - | [* black] Torque nozzle tube to valve using two wrenches (3/4" and 7/8") |
| - | [* black] Turn air to actuator OFF to set poppet stem into seat |
| + | [* black] Thread nozzle tube into bottom of valve body |
| + | [* black] Torque nozzle tube to valve using two wrenches (3/4" and 7/8") |
| + | [* black] Turn air to actuator OFF to set poppet stem into seat |
