Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #11

Edit by Adam Dumas

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Tighten nozzle tube to valve using two wrenches (3/4" and 7/8")
-[* black] Turn air to actuator OFF to set poppet stem into seat
-[* yellow] Apply water pressure to valve assembly to verify there are no leaks
+[* black] Tighten the nozzle tube to the valve using 3/4" and 7/8" wrench.
+[* black] Turn the air to actuator OFF to set the poppet stem into the seat.
+[* yellow] Apply water pressure to the valve assembly to verify there are no leaks.