Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Adam Dumas

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Inspect inside of HP cylinder, if scratches/galling have occurred, take 180 grit abrasive in each end to remove blemishes
-[* black] Repeat rolling motion with scotch brite to polish inside bore
+[* black] Inspect inside of HP cylinder, if scratches/galling have occurred, use scotch brite or similar abrasive pad in each end to remove blemishes
+[* black] Repeat process (if needed) with 1500 abrasive to polish inside bore
[* black] Apply HP Lubricant to red o-ring