Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Adam Dumas

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Insert brass packing follower into HP cylinder, behind dynamic seal back-up
-[* black] Continue to [guide|31|Static Seal] assembly. If complete, reassemble HP cylinder into intensifier assembly.
+[* black] Insert the brass packing follower into the high-pressure cylinder, behind the dynamic seal back-up.
+[* black] Continue to [guide|31|static seal] assembly. If complete, reassemble the high-pressure cylinder into the intensifier assembly.