Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Arion Vandergon

Edit approved by Arion Vandergon


Step Lines

-[* black] Insert Brass Packing Follower (behind dynamic seal back-up) level with face of HP cylinder
-[* black] Continue to [guide|31|Static] assembly, if complete, continue to Intensifier assembly
+[* black] Insert Brass Packing Follower into HP cylinder, behind dynamic seal back-up
+[* black] Continue to [guide|31|Static Seal] assembly. If complete, reassemble HP cylinder into intensifier assembly.