Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Adam Dumas

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Inspect inside of HP cylinder, if scratches/galling have occurred, use Scotch Brite or similar abrasive pad and roll back and forth to each end of HP cylinder to remove blemishes
-[* black] Repeat process (if needed) with 1500 grit abrasive to polish inside of bore
-[* black] Apply [http://www.accustream.com/all-products/11447.html|High Pressure Grease] to o-ring
+[* black] Inspect the inside of the high-pressure cylinder, if scratches/galling have occurred, use Scotch Brite or a similar abrasive pad and roll back and forth to each end of the high-pressure cylinder to remove blemishes.
+[* black] Repeat the process (if needed) with 1500 grit abrasive to polish the inside of the bore.
+[* black] Apply [http://www.accustream.com/all-products/11447.html|high pressure grease] to the O-ring.