Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Adam Dumas

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Inspect inside of HPcylinder, if scratches/galling have occurred, take 180 grit abrasive in each end to remove blemishes
+[* black] Inspect inside of HP cylinder, if scratches/galling have occurred, take 180 grit abrasive to each end to remove blemishes
[* black] Repeat process with scotch brite to polish inside of bore
[* black] Lubricate red o-ring with HP Lubricant