Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by Adam Dumas

Edit approved by Adam Dumas

Before
After
Unchanged

Step Lines

-[* black] Remove old components from plunger end of HP cylinder with proper tooling
-[* black] Remove Spacer Tube
-[* black] Inspect inside of cylinder, if scratches/galling has occurred use 180 grit abrasive paper at each end and roll to remove blemishes.
+[* black] Remove old components from plunger end of [http://www.accustream.com/all-products/11223.html|HP Cylinder] with proper tooling
+[* black] Remove [http://www.accustream.com/all-products/11605.html|Cylinder Liner]
+[* black] Clean HP cylinder threads of all [http://www.accustream.com/all-products/11111.html|Blue Goop] with isopropyl alcohol