Skip to main content

Changes to Step #3

Edit by Arion Vandergon

Edit approved by Arion Vandergon

Before
After
Unchanged

Step Lines

[* black] Hand tighten the hex bolts (4) into the waterjet pump frame.
-[* black] Tighten the hex bolts (4) into the waterjet pump frame using a 1/2 standard open end, box end, or combination end wrench.
+[* black] Tighten the hex bolts (4) into the waterjet pump frame using a 1/2" standard open-end, box-end, or combination-end wrench.
[* black] Align the slots (4) on the boost motor with the holes on the mounting bracket.