Skip to main content

Changes to Step #3

Edit by Arion Vandergon

Edit approved by Arion Vandergon

Before
After
Unchanged

Step Lines

-[* black] Hand thread the bolts (4) into the waterjet pump frame.
+[* black] Hand tighten the bolts (4) into the waterjet pump frame.
[* black] Tighten the bolts (4) into the waterjet pump frame using a 1/2 standard open end, box end, or combination end wrench.
-[* black] Align the slots (4) on the boost motor with the through holes on the mounting bracket.
+[* black] Align the slots (4) on the boost motor with the holes on the mounting bracket.