Skip to main content

Changes to Step #2

Edit by Arion Vandergon

Edit approved by Arion Vandergon

Before
After
Unchanged

Step Lines

[* black] Carefully lift the boost pump motor straight up (this may be easier with a second person).
-[* black] Place the boost motor mounting bracket on the waterjet pump frame beneath the boost motor. The bracket should have the angled edge facing the left (rear) end of the motor.
-[* black] Insert the 5/16-18 X 3/4 inch hex bolts (4) and 5/16 lock washers (4) through the bracket into the waterjet pump frame.
+[* black] Place the boost motor mounting bracket on the waterjet pump frame under the boost motor. The bracket should have the angled edge facing the left (rear) end of the motor.
+[* black] Insert the 5/16-18 × 3/4 inch hex bolts (4) and 5/16 lock washers (4) through the bracket into the waterjet pump frame.