Skip to main content

Changes to Step #2

Edit by Arion Vandergon

Edit approved by Arion Vandergon

Before
After
Unchanged

Step Lines

[* black] Carefully lift the boost pump motor straight up.
[* black] Place the boost motor mounting bracket on the waterjet pump frame beneath the boost motor. The bracket should have the angled edge facing the left (rear) end of the motor.
-[* black] Insert the 5/16-18 X 3/4 inch bolts (4) through the bracket into the waterjet pump frame.
+[* black] Insert the 5/16-18 X 3/4 inch bolts (4) and lock washers (4) through the bracket into the waterjet pump frame.