Skip to main content

Changes to Step #1

Edit by Arion Vandergon

Edit approved by Arion Vandergon

Before
After
Unchanged

Step Lines

-[* black] Inspect kit parts to verify the contents are complete (see relevant parts list above). If parts are missing or damaged, contact Hypertherm - Waterjet for replacements.
-[* black] Loosen the 5/16-18 X 3/4 inch hex bolts (4) that fasten the boost pump motor to the waterjet pump frame.
+[* black] Inspect the kit parts to verify the contents are complete (see the relevant parts list above). If parts are missing or damaged, contact Hypertherm Waterjet for replacements.
+[* black] Loosen the 5/16-18 × 3/4 inch hex bolts (4) that fasten the boost pump motor to the waterjet pump frame.
[* black] Remove the hex bolts (4) and lock washers (4) to free the motor from the frame.