Skip to main content

Changes to How to install a boost motor mounting bracket on a HyPrecision S-series pump Introduction

Edit by Arion Vandergon

Edit approved by Arion Vandergon

Before
After
Unchanged
Title
How to install a boost motor mounting bracket toon a HyPrecision S-series pump
Summary
This guide will explainexplains how to install a motor mounting bracket for the boost pump on a HyPrecision 50S, 60S, or 75S waterjet pump. This guide also applies to AccuStream AS-6050, AS-6060, and AS-6075 waterjet pumps.

Tools

  • Standard 1/2" Open-End, Box-End, or Combination-End Wrench x2 added.

Parts

  • 15621 - Boost Pump Mounting Plate x1 added.
  • 5/16 SAE Flat Washer x8 added.
  • 5/16-18 × 1 Hex Bolt x4 added.
  • 5/16-18 Nylon Insert Nut x4 added.